Skip to content
How to use alternative configurations for MyCrypNet

MyCrypNet configurations offered on our website are suitable for the most common connection needs. But it is also possible to connect to MyCrypNet with alternative configurations.

How to use alternative configurations for MyCrypNet

The free and scalable technologies that we use for MyCrypNet service allows multiple configurations to meet different needs. The configuration we offer on each tutorial page is the one we consider the most universal, which will work in almost all situations users come accross. However, the service allows other alternative configurations of which we will describe advantages and disadvantages.

The default configuration

On each of our MyCrypNet installation tutorial pages, there’s a download configuration file called “MyCrypNet.ovpn” or “MyCrypNet.conf” depending on the platform you chose.

To access the installation tutorials:

This tutorial shows how to install MyCrypNet on Android™
This tutorial shows how to install MyCrypNet on IOS®
This tutorial shows how to install MyCrypNet on Linux®
This tutorial shows how to install MyCrypNet on Mac OS®
This tutorial shows how to install MyCrypNet on Windows®

The settings we include in these files contain our security informations, allowing the transfer of your data safely, but also the addresses of our servers that your device will contact to establish your MyCrypNet private secure network.

Our default configuration uses the same settings as a connection to a secure HTTPS Internet website (TCP port 443). We have chosen these settings so that the connection to your MyCrypNet network is possible in most real-life situations. Of course, HTTPS traffic is very rarely filtered. Our MyCrypNet service uses the same settings, so the connection will mostly run smoothly.
We allow the most people to access our service, in the most diverse situations.

When your MyCrypNet access is configured to work with two factors authentication, you must use the specific configuration file, as specified in the article “How to set the 2 factor authentication on MyCrypNet“.

A configuration for optimal performance

MyCrypNet supports a performance-oriented alternative configuration. When you want to use MyCrypNet on a low-filtered or not filtered network, it’s possible to use this configuration which allows higher bandwidth rates for the transfer of your data.

It is important to note that regardless of the configuration used (the default configuration, or the “performance” one), the security of your MyCrypNet network remains the same and maximum. This choice does not imply any modification of the encryption of the transmitted data.
In addition, it is possible to use different configurations within your MyCrypNet network (default configuration and / or performance-oriented configuration, personal configuration, etc.).

We offer the following configuration that is performance-oriented, with higher bandwidth rates and making the best use of your Internet connection capabilities:

This tutorial shows how to install MyCrypNet on Android™
This tutorial shows how to install MyCrypNet on IOS®
This tutorial shows how to install MyCrypNet on Linux®
This tutorial shows how to install MyCrypNet on Mac OS®
This tutorial shows how to install MyCrypNet on Windows®

Disconnection and reconnection to your MyCrypNet network is required to apply the new configuration.

If you notice connection problems with this configuration, we recommend you to return back to the initial settings offered in the tutorials.

MyCrypNet allows you to configure your connection mode in many ways, whether to improve the performance of your network, or to bypass certain filtering or blocking situations. The configuration that we propose by default is the one that will commonly work for most accesses.

Create your secure network

Follow us
© 2019 Coppint Market Place Ltd, All rights reserved.